 |
Facility of Engine pick-up and deliver at your door step |
| |
|
 |
Every engine is maintain in our workshop by Job Card and each
part of the engine has been mentioned the job number on it. |
| |
|
 |
Special washing division for engine |
| |
|
 |
After washing engine passed by chemical process. It increase the
life of engine. After that engine washed by pressure on each side of engine. |
| |
|
 |
After chemical wash it has been written job number of each part of engine.
The job number helps after re-conditioning all parts of the engine and re powering engine. |
| |
|
 |
We use air gun machine to remove and fix the nut balt of the engine. |
| |
|
 |
Cylinder Boring Machine
From 35 mm diameter to 900 mm diameter boring works |
| |
|
 |
Horning Machine
After boring "cylinder and blocks" comes to horning machine for polishing. |
| |
|
 |
Main line boring machine
From 22 mm diameter to 300 mm diameter Line Bor Works |
| |
|
 |
Main line borin machine
Line Bor for Heavy generator Block |
| |
|
 |
Cranks Shaft Alignment Machine
Facilities for Hank Shaft Band to through |
| |
|
 |
Cranks Shaft Grinding Machine
60"
Different grinding facilities for cars and tractors |
| |
|
 |
Cranks shaft grinding machine
84"
Facilities of Hank Shaft for Engine of Commercial Vehicles and Trucks |
| |
|
 |
Connecting rod Bush Cutting and Boring Machine
Capacity of 15 mm diameter to 100 mm diameter
bush cutting and fitting |
| |
|
 |
Connecting and alignment machine
Alignment after bush cutting in connecting rod |
| |
|
 |
Connecting rod machine in hand shaft |
| |
|
 |
Remote control welding machine
Welding - Brass, Alluminum, casting and art welding facility |
| |
|
 |
Lethe machine |
| |
|
 |
Head testing machine
Head lickeage testing |
| |
|
 |
Surfacing machine
facing repairing facility for
damage face of block and head |
| |
|
 |
Plat facing machine
Facing by grinding machine for engine places |
| |
|
 |
Valve refresher machine
old valve refacing works |
| |
|
 |
New seat and guide fitting in head,
cutting works and valve grinding works |
| |
|
 |
after Hand shaft grinding,
main chacking and system top chacking |
| |
|
 |
engine checking |
| |
|
 |
Engine before chemical wash
and Engine after chemical wash |
| |
|
 |
Engine before chemical wash
and Engine after chemical wash |
| |
|
 |
Engine before chemical wash
and Engine after chemical wash |
| |
|
 |
Engine loading - unloading facility |
| |
|
